How Authentication Operates; General Authentication Process Using A Tacacs+ Server - HP ProCurve 6120G/XG Manual

TACACS+ Authentication

How Authentication Operates

How Authentication Operates

General Authentication Process Using a TACACS+
Server
Authentication through a TACACS+ server operates generally as described
below. For specific operating details, refer to the documentation you received
with your TACACS+ server application.
First-Choice
TACACS+ Server
Second-Choice
TACACS+ Server
(Optional)
Third-Choice
TACACS+ Server
(Optional)
Figure 4-8. Using a TACACS+ Server for Authentication
Using figure 4-8, above, after either switch detects an operator's logon request
from a remote or directly connected terminal, the following events occur:
1. The switch queries the first-choice TACACS+ server for authentication
2. When the requesting terminal responds to the prompt with a username,
3. After the server receives the username input, the requesting terminal
4-24
ProCurve Switch
Configured for
TACACS+ Operation
ProCurve Switch
Configured for
TACACS+ Operation
of the request.
• If the switch does not receive a response from the first-choice
TACACS+ server, it attempts to query a secondary server. If the
switch does not receive a response from any TACACS+ server,
then it uses its own local username/password pairs to authenti­
cate the logon request. (See "Local Authentication Process" on
page 4-26.)
• If a TACACS+ server recognizes the switch, it forwards a user-
name prompt to the requesting terminal via the switch.
the switch forwards it to the TACACS+ server.
receives a password prompt from the server via the switch.
Terminal "A" Directly Accessing This
Switch Via Switch's Console Port
A
Terminal "B" Remotely
Accessing This Switch Via Telnet
B