HP ProCurve 6120G/XG Manual page 282

Hp procurve series 6120 blade switches access security guide
Hide thumbs Also See for ProCurve 6120G/XG:
Table of Contents

Advertisement

Configuring Secure Shell (SSH)
Configuring the Switch for SSH Operation
For example, to generate and display a new key:
Figure 7-5. Example of Generating a Public/Private Host Key Pair for the Switch
The 'show crypto host-public-key' displays it in two different formats because
your client may store it in either of these formats after learning the key. If you
wish to compare the switch key to the key as stored in your client's known-
hosts file, note that the formatting and comments need not match. For version
1 keys, the three numeric values bit size, exponent <e>, and modulus <n> must
match; for PEM keys, only the PEM-encoded string itself must match.
7-12
show crypto host-public-key
Displays switch's public key. Displays the version 1
and version 2 views of the key.
[ babble ]
Displays hashes of the switch's public key in phonetic
format. (See "Displaying the Public Key" on page
7-14.)
[ fingerprint ]
Displays fingerprints of the switch's public key in
hexadecimal format. (See "Displaying the Public Key"
on page 7-14.)
Host Public
Key for the
Switch
Version 1 and Version 2 views
of same host public key

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 6120xgProcurve 6120 series

Table of Contents