4.2.4 Breathing Circuit Connection
Figure 4–5 shows where the circuit tubing connects to the device.
Figure 4–5 Typical Breathing Circuit Connection
4.2.5 Rear Panel
Figure 4–6 shows the rear panel.
SmartCard
Connector
Cord Retainer
NOTE:
The SmartCard Connector is located on the side of the device.
WARNING: In order to ensure proper protection against electric shock,
only communications accessories with an IEC 60601-1
approved power supply may be connected through the
SleepLink interface. All IEC 950 devices must only be
connected to the 7-pin connector with the Respironics
Isolation cable (Part Number 1012865).
Patient Interface
Exhalation Port
Circuit
Tubing
Bacteria
(Optional)
Communications
Connector Port
Figure 4–6 Rear Panel
Filter
Connection
Power Inlets
Cord Retainer
Breathing
Circuit
Filter Cap
User Manual
15