Breathing Circuit Connection - Respironics BiPAP AVAPS User Manual

PC Indicates that the device is in PC therapy mode.
Indicates that the Ramp function is in progress or the ramp length setting is being
RAMP
displayed.
RAMP
Indicates that the Ramp Starting Pressure is being displayed.
START
RISE TIME Indicates that a rise time setting is being displayed.
RR Indicates that the Respiratory Rate (RR) is being displayed.
The small "s" on the right side of the display (above "cm H
s
alphanumeric digits are displaying a time value, in seconds.
S Indicates that the device is in Spontaneous therapy mode.
S/T Indicates that the device is in S/T therapy mode.
SETUP Indicates that the device is in Provider mode and not in User mode.
T Indicates that an inspiratory time setting is being displayed.
i
V Indicates that the Tidal Volume is being displayed.
T
V Indicates that the Estimated Exhaled Tidal Volume is being displayed.
TE
4.2.4 B C
reathing irCuit
Figure 4–6 shows where the circuit tubing connects to the device.
User Manual
C
onneCtion
Patient Interface
Exhalation Port
Circuit
Tubing
Figure – Typical Breathing Circuit Connection
Bacteria
Breathing
Filter
Circuit
(Optional)
Connection
O") indicates that the
2