Respironics BiPAP S/T User Manual page 29

c. The third screen to appear is the Blower Hours screen, which
displays the blower hours time meter:
NOTE: With the exception of the Pressure On/Off button, the control
pad is inactive during these first three screens. Each of these
screens appears for approximately 1-3 seconds.
d. The next screen that appears is the Standby screen, shown in
Figure 6–4. This indicates that the device is in the Standby state.
2. Press the Pressure On/Off button to put the unit into the Operate
state. The Monitoring screen, shown in Figure 6–5, appears.
Both the Monitoring and the Standby screens display the Patient
Disconnect, Apnea, and LED backlight icons if these features are
enabled. Additionally, the SmartCard icon displays if a SmartCard is
inserted.
The Monitoring screen also displays the actual measured pressure
and the Flex icon if Flex is enabled.
Figure 6–3 Blower Hours Screen
Figure 6–4 Standby Screen
Figure 6–5 Monitoring Screen
25
User Manual