Connecting the Breathing Circuit
12
Figure 3-3 shows where the circuit tubing connects to the
Harmony S/T unit.
Rear Panel
Figure 3-4 shows the location of the:
•
air inlet filters
•
AC inlet
•
DC inlet
The Harmony S/T uses a gray pollen filter that is
washable and reusable, and a white ultra-fine filter that
is disposable.
The AC Inlet is where the AC receptacle is connected if
you are running the unit from house voltage.
The DC Inlet is where the DC plug is connected if you are
running the unit from a 12 Vdc source.
Figure 3-3. Breathing Circuit Connection.
DC Inlet
Figure 3-4. Rear Panel.
S/T Patient Guide
Patient
Interface
Port
DC Cord
Retainer
AC Inlet
Filter Access
Panel