6.2.2.4 Changing the LED Backlight Setting
When airflow is turned on and the device is in the Operate state, you can
turn the control pad lighting behind the buttons on or off using the LED
backlight setting.
NOTE:
The lights are always on when the airflow is off and the unit is
in Standby.
To change the LED backlight setting, complete the following steps:
1.
From either the Monitoring or Standby screens, press the Right User
button until the LED Backlight Setting screen appears, as shown in
Figure 6–11.
Figure 6–11 LED Backlight Setting Screen
2.
Press the Heat or Ramp button to select a new setting. A setting of 1
means the light is on, while 0 means the light is off.
31
User Manual