QMS Magicolor 330 Manual page 78

Click Open.


Select Remote Path... and go to USR.


Click Select.
5 Verify the destination as SYS:/USR/*.*.
You might need to type this information in, if it is not present.
6 Select Download to send the custom ICC RGB Source or
Simulation profile to the magicolor 330's internal hard drive.
7 Verify the SProfile.ps file contains the correct file name.
You can use a text editor such as Notepad or SimpleText to
change the file name listed in the SProfile.ps file.
8 Download the file SProfile.ps to register the profile.


Select PS Utilities... from the Printer menu.


Under the Download tab, select Destination as PostScript.


Select the Local Files... button and specify the SProfile.ps.


Click Open.


Select Remote Path... and go to PostScript.


Click Select.
To view the current profiles on the magicolor 330 access Special
Pages under the Administration menu and select Yes under CMM
Profile Page.
To utilize your custom profiles, you will need to select Custom 1,
Custom 2 or Custom 3 from the RGB Source or the Simulation pop-
up menus located under Printer Specific Options in the Print dialog
box for Macintosh. In Windows 95, you can utilize your profiles from
the Color tab by selecting Configure for ICC Color Matching or select-
ing Document Defaults in the QMS Windows NT driver.