QMS Magicolor 330 Manual page 17

Rough envelopes or envelopes with clips


Self-adhering envelopes
» Note: If acidic paper is used, characters may fade; in which case,
change to a neutral paper.


Sheets adhered with static electricity


Label sheets with the backing sheet exposed


Any media that is affected by high fusing temperature
(311° F/155° C)
Take a stack of about 250 sheets ( ½ ream).
1

Caution: Don't unwrap paper above the printer as this might
cause paper particles to fall into the printer.
2 Fan paper to separate it and to help prevent static buildup
that may cause double feeding.
» Note: Do not fan transparencies.
3 Take off the top and bottom sheets.
Residual glue buildup on these sheets may cause media jams.