QMS Magicolor 330 Manual page 153

This status message...
TOP STACK FULL
UPPER TRAY LOW
USED OPC END OF LIFE
WAITING FOR IDLE
WAITING ON INPUT
END JOB?
WARMING UP
WASTE TONER BOX
MISSING
means...
The top output bin is full. Removed the
The media is the standard
(upper) is low.
The OPC drum cartridge
installed in the printer has
no useful life left.
» Note: You'll see this
message if you install a
used OPC drum car-
tridge in the printer.
An active job is in
process. Access to the
menu is not allowed until
the job is finished.
The compiler is waiting on
incoming data for the first
job in the queue. The job
may not have an end-of-
job indicator and
therefore cannot end. The
message clears if more
input arrives from the port
or if you press the Cancel
key. No other jobs can be
printed until this job has
ended.
The printer is warming up. Wait. No other
The waste toner box is
not installed.
Do this...
printed jobs from
the output bin.
Insert more media.
Install a new OPC
drum cartridge.
Wait until the print
job is finished
and the printer
goes idle.
Wait until the job is
finished and the
printer goes idle to
access the
configuration menu.
action needed.
Install the waste
toner box.