QMS Magicolor 330 Manual page 112

This table provides you with data relative to the settings of the printer.
Compatibility
Level
Do Startup
Page
Do Error
Handler
Do Sys/Start
Is Password
0?
Default
Chaining
Default Paper
Tray
Identifies the PostScript emulation level.
Configuration Menu: No equivalent
Identifies whether the printer startup page is
turned on or off.
Configuration Menu: Administration/Startup
Options/Do Start Page
Identifies whether the PostScript Error Handler is
on or off. Error Handler is a diagnostic tool that
identifies PostScript errors encountered during a
print job.
Configuration Menu: Administration/Startup
Options/Do Error Handler
Identifies whether the printer controller checks the
hard disk for a PostScript file named SYS\START
and then executes the file. This file does not print.
Configuration Menu: Administration/Startup
Options/Do Sys Start
Identifies whether the Administration menu
password is set.
0=Off
Configuration Menu: Installation/Use Admin Pwd
Identifies whether tray chaining is enabled or
disabled. Tray chaining allows the printer to draw
media from another input source with either the
same or any size and type of media (dependent
on the choice selected) automatically when the
first input source empties.
Configuration Menu: Operator Control/
Chain Inputbins
Tells you which input source is the default.
Configuration Menu: Operator Control/Inputbin