QMS Magicolor 330 Manual page 149

This status message...
FUSER MISSING
FUSER OIL LOW
FUSER UNIT MISSING
HCF COVER OPEN
IDLE
INCORRECT OPC DRUM 1
INCORRECT OPC DRUM 2
INCORRECT OPC DRUM ID A non-QMS drum
means...
The fuser is not installed. Install the fuser.
The oil for the fuser unit is
running low.
The fuser unit is not
installed.
The cover on the right
side of the high-capacity
input feeder is open.
The printer is on line, but
no jobs are in process.
A non-QMS drum
cartridge has been
installed.
The printer has detected
a problem with the
memory in the OPC drum
cartridge.
cartridge has been
installed.
Do this...
If you have a new
fuser oil roller on
hand, you may
want to install it
now. If you don't,
order one now. A
limited number of
copies (about 100)
will still print.
However, when the
oil runs out, the
printer stops and
the FUSER OIL
EMPTY message
appears.
Install the fuser
unit.
Close the cover.
No action needed.
Install a QMS OPC
drum cartridge.
Replace the OPC
drum cartridge.
Install a QMS OPC
drum cartridge.