QMS Magicolor 330 Manual page 77

Listed below are the steps for downloading a custom ICC profile to
the magicolor 330 printer. Your magicolor 330 must be an EX model
or a magicolor 330 that has an internal hard drive. You can not down-
load profiles to external hard drives.
1 After a custom ICC RGB Source or Simulation profile has
been created, rename the profile so it can be recognized by
the printer.
This renaming is done, so the PPD for Macintosh, Windows 95
PPD, and Windows NT driver can correctly identify the profile.
You must name your custom ICC RBG Source profile either
custrgb1.icc, custrgb2.icc, or custrgb3.icc. Listed below is an
example of some custom ICC RGB Source profiles and how they
would be renamed.
User-Defined Name
CORLMTL.ICC
MYPROF.ICC
UMAXD50.ICC
» Note: If you do not rename your files correctly, the magicolor 330
PPDs can not select the custom profiles. However, you will still be
able to download the profiles and use them as a default setting
for the RGB Source and Simulation for ICC Color Matching.
2 Once you have renamed your custom ICC RGB Source or
Simulation, you will need to used CrownAdmin to download
a profile to the magicolor 330.
3 Locate your QMS Software Utilities CD-ROM and install
CrownAdmin if necessary.
4 Download the custom profile via CrownAdmin.


Select PS Utilities... from the Printer menu.


Under the Download tab select Destination as Other.


Select the Local Files... button and specify the ICC profile to
download.
330 Naming for PPDs
custrgb1.icc
custrgb2.icc
custrgb3.icc