Entering Patient Id - HP Codemaster 100 User Manual

Acquiring a 12-Lead ECG

Entering Patient ID

Entering patient ID information is not required to record an ECG. Note that for
12-Lead, some ID fields affect the interpretation of ECGs.
To enter patient identification, perform the following steps (these steps assume all
ID fields are enabled).
1 Press ID. If there is an existing patient ID in the 12-Lead, the question
New patient? is displayed. If not, the patient ID entry screen is displayed.
a. If you press Yes, Enter New ID
the existing patient ID information is cleared and the patient ID entry screen
is displayed.
b. If you press No, Edit Old ID
existing patient ID information is displayed for you to review or change, if
necessary.
2 Type the ID number and press
patient's name.
3 Type the patient's name and press the
requests the patient's age. It also allows you to change the age units (Years,
Year of Birth, Months, Weeks, Days, or Hours).
4 Type the patient's age. Press F3 until the screen displays the age units you want
to use. Press
There are more patient ID fields into which you can enter patient information such
as Sex and Chest/LA Pain. All of the patient ID fields are shown in Table 6-4 on
page 6-16. Note that some (or all) of these fields may be inactive for your
configuration.
All these fields are user-configurable through the Configure 12-Lead Menu.
Each time you press the
To return to a previous field, move the cursor up by pressing
6-14
to answer the New patient? prompt,
to answer the New patient? prompt, the
, , or
or .
or , the cursor moves down to the next ID field.
. The next line requests the
, , or . The next line
or .