Resetting The Gateway - 2Wire HomePortal 3801HGV User Manual

HomePortal 3801HGV Gateway User Guide
5. Enter an integer greater than 0 in the Limit Logging to text box.
6. Click Save.

Resetting the Gateway

Objective
To reset the gateway.
You may need to reset the HomePortal 3801HGV gateway if one or all the LEDs is/are solid red.
This indicates that there is some failure within the system. It is recommended that you discuss
your problems with customer service before attempting to reset your device.
You can work with the following areas on this page:
• System & Link Resets
You can reset the following in this area:
• Device List
• IP/PPP
• Broadband
• System
• Configuration Resets
You can reset the following in this area:
• Wireless Configuration
• Firewall Configuration
• Reset to Factory Default State
You can reset the gateway to factory default in this area
Note
Resetting the system or rebooting it may take several minutes before broadband is
restored.

Resetting the Gateway

Using Diagnostics Features
106