Testing Dnsquery - 2Wire HomePortal 3801HGV User Manual

HomePortal 3801HGV Gateway User Guide

Testing Dnsquery

To test dnsquery:
1. Navigate to Settings > Diagnostics > IP Utilities, and dnsquery in the Test Type drop-down
list. The following page appears.
2. Type the host address in the Host Address text box.
3. Select the Enable Name Resolution check box if you want to find the IP address
corresponding to the host address.
4. Click Start to start testing. You can view the results in the space provided.
The following figure displays the test results.
Testing IP Utilities
Using Diagnostics Features
102