Connecting Hpna Interface To Iptv Set Top Box - 2Wire HomePortal 3801HGV User Manual

HomePortal 3801HGV Gateway User Guide
2. To connect 2 phones:
a. Connect one end of the line splitter to the HomePortal 3801HGV gateway Voice 1&2
port.
b. Connect the phone cables to the first and second jack of the splitter.
Figure 7: VoIP Connection Using Splitter

Connecting HPNA Interface to IPTV set top Box

The HomePortal 3801HGV gateway can be configured to use IPTV services through the cable port.
Follow these steps to connect the gateway to the set top box:
1. Connect one end of the coaxial cable to the CABLE port and the other end to the CABLE IN
port of Ethernet over Coax adapter.
2. Connect one end of the Ethernet cable to the Ethernet port of Ethernet over Coax adapter
and the other end to the Ethernet port on the set top box.
Note
The Ethernet over Coax adapter is independently powered, and should be installed close to
a power outlet. Refer to the manufacturer's instructions that came with the Ethernet over
Coax adapter.
Connecting HPNA Interface to IPTV set top Box
Installing the HomePortal 3801HGV Gateway
9