Enabling Notifications; Disabling Notifications - 2Wire HomePortal 3801HGV User Manual

HomePortal 3801HGV Gateway User Guide

Enabling Notifications

To enable notifications:
1. Navigate to Settings > System Info > Event Notifications. The Event Notifications page
appears.
2. Select the Broadband Status Notification and/or Router-Behind-Router Detection check
boxes.
3. Click Save.
Note
To enable router-behind-router detection, make sure that DHCP and NAT are enabled, and
the gateways are not in bridge mode.

Disabling Notifications

To disable notifications:
1. On the Event Notifications page, clear the Broadband Status Notification and/or Router-
Behind-Router Detection check boxes.
2. Click Save.
See Also
Using Diagnostics Features
Troubleshooting 3801HGV Gateway
Enabling Event Notifications
on page 93
on page 109
Setting Up System Information
33