HomePortal 3801HGV Gateway User Guide
Viewing HomePNA Status
To view HomePNA status page, navigate to Settings > LAN > Wired Interfaces. Click HomePNA
Status listed at the bottom of the wired interfaces page. The following page appears:
Refer to the following table to understand the HomePNA Network parameters listed on the status
page:
Parameter
Firmware Version
Firmware Signature
HPNA Physical Link
Network Mode
Node ID
MTU
MAC Address
Configuring DHCP
Objective
To configure Dynamic Host Configuration Protocol (DHCP) for setting up your private network. In this
task, we are listing the steps to configure the DHCP server.
DHCP allows dynamic allocation of network addresses. Your gateway can be both a DHCP client and
a DHCP server. When communicating with the local network devices, such as computers and
printers, your gateway functions as a DHCP server. However, while communicating with your ISP , the
gateway functions as a DHCP client.
Viewing HomePNA Status
Description
Firmware version number.
Firmware signature number.
Displays whether the HPNA interface is enabled or disabled.
Network mode of the HPNA interface.
Node ID of HPNA interface.
Maximum Transmission Unit is the maximum size allowed on data packets,
that are communicated on HPNA network.
MAC address of the gateway.
Configuring LAN Devices
66