Allowing Mac Addresses - 2Wire HomePortal 3801HGV User Manual

HomePortal 3801HGV Gateway User Guide
3. Enable or disable the MAC filtering by selecting or clearing the Enable MAC Filtering check
box. MAC filtering is disabled as a default setting. Disabling MAC address filtering allows
all the wireless clients to access the device.
4. Click Save. This ensures that the configured MAC filtering setting is saved.
5. Allow block devices to access wireless interface based on MAC filtering feature by
configuring the Select Devices to be Allowed or Blocked pane.

Allowing MAC Addresses

Objective
This feature enables you allow wireless connection to all devices, or an individual device based on
the MAC address of the device.
Securing the Wireless Network Using MAC Filtering
Configuring LAN Devices
58