Setting Up Wireless Network - 2Wire HomePortal 3801HGV User Manual

HomePortal 3801HGV Gateway User Guide
The following figure displays the Devices section of the Status page.
Refer to the following table to hide inactive devices and clear the list of devices appearing on the
Status page:
Step
Click Hide Inactive Devices.
Click Clear List.

Setting Up Wireless Network

Objective
To setup your wireless network.
This configuration determines the wireless settings used to access the wireless interface of the
gateway.
Steps
1. Navigate to Settings > LAN > Wireless. The Wireless page appears.

Setting Up Wireless Network

Result
Devices that are no longer on the local network will be hidden from the
Devices list on this page and under Home Network Devices on the Home
page.
Devices that are no longer active on the local network are cleared from the
Devices list on this page and under Home Network Devices on the Home
page.
Configuring LAN Devices
53