Connecting To Image Sources - Epson PowerLite 260D User Manual

Connecting to Image Sources

You can connect any other compatible image source to your projector.
You can connect up to three (PowerLite 260d) or four
(PowerLite 280d) image devices at one time.
The projector automatically detects the image format. It can receive
CVBS signals, Y/C signals, RGB signals, and Component signals. The
type of cable you need depends on the image source:
For CVBS signals, use a commercially available RCA A/V cable.
■
See page 24.
For Y/C signals, use the Y/C signal cable supplied with your
■
image device or order one from Epson. See page 25.
For RGB signals, use the VGA computer cable included with the
■
projector. See page 26.
■ For Component signals, you'll need the optional Epson
Component signal cable. See page 27.
After connecting your image device to the projector, you may want to
connect an audio cable to play sound from your image equipment
through the projector's built-in speaker. See page 28 for instructions.
Setting Up the Projector
23