Epson PowerLite 260D User Manual page 60

note
To cancel the Operation
Lock function from the
projector, press the
Enter
button for about seven
seconds.
Fine-tuning the Projector
60
■
Operation Lock
Disables all projector buttons (
except the P
Power
operate the projector from the remote control. Changes to
this setting take effect after you restart the projector. (After
you turn off the projector, wait for the power light to turn a
steady orange before turning it on again.) See page 70 for
more information.
■
Brightness Control
Select lamp brightness when the projection is too bright
Low
for the room. The
consumption and fan noise. Select
maximum brightness. (Also check the
the Image menu; see page 54.)
■
Volume
Adjusts the volume for the projector's speaker.
■
Remote Receiver
Deactivates the projector's front and/or back sensors that
detect signals from the remote control. This may be necessary
to prevent interference from bright fluorescent lights.
■ Test Pattern
Displays a test pattern to assist you in focusing and zooming
the image, and correcting the image shape. (To cancel the
displayed test pattern, press
4. When you're finished, press
) or all the buttons
Full Lock
button (
Partial Lock
setting also reduces electricity
Low
to project the
High
Brightness
.)
Esc
or
Esc Menu.
). You can still
setting in