Playing Sound Through The Projector - Epson PowerLite 260D User Manual

Setting Up the Projector
28

Playing Sound Through the Projector

The projector has a built-in speaker with a maximum output of 1 W.
You can play sound from your image equipment through the
projector's speaker if your image device has an audio output port.
For RCA-Style Audio Output Ports
Most image devices have an RCA-style audio output port. In this case,
use a commercially available RCA-style audio cable to connect the
projector to your image source:
1. Connect the red and white plugs on one end of the audio cable to
the jacks on the projector.
L-Audio-R
PowerLite 260d
PowerLite 280d
2. Connect the red and white plugs on the other end of the audio
cable to the corresponding color-coded audio output port on your
image source.
If you don't need to make any other connections, you can plug in
your projector and turn it on. See page 31 for instructions.
Connect audio adapter
red and white plugs