16
en | Card Functions and Locations
Power supply modules
Telephone line terminator
card
CPU terminator card
Table 5.3: D6600 Line Cards and Modules
5.3
D6600 Rear View
The D6600 has input and output pin connector sockets for up to eight line cards, network
option (if installed), and one CPU card. It also has slots for connecting these cards to their
corresponding terminator cards.
Figure 5.2: D6600 Communications Receiver/Gateway (Rear View)
Callout ᅳ Description
1 ᅳ Blank plate and location of optional Conettix D6672 COM1 Expansion Kit
2 ᅳ Conettix D6615 CPU Terminator Card
3 ᅳ Card slot covers
4 ᅳ Conettix D6645 Line Terminator Card
2012.11 | 08 | 4998122704
D6630 and
D6631
D6645
D6615
Installation and Operation Guide
Conettix Communications Receiver/
The power supply modules regulate the
power used by the D6600. These are not
field serviceable.
Located behind the line card, the
telephone line terminator card isolates
and protects the line card against outside
voltage surges that might come over the
telephone line. Each line card must have a
line terminator card.
Located behind the CPU card, the CPU
terminator card provides the D6600 with
two serial ports (COM3 and COM4), a
parallel port (parallel printer), and a
general I/O port (I/O). The serial ports
can be used for computer automation, PC
connection for programming, or a network
connection with a Network Ethernet
Module (see specific installation guide
supplied with your product).
Bosch Security Systems, Inc.
Gateway