Conettix Communications Receiver/
Gateway
14. Press Enter to view 6.4.1 IP Address 1.
15. Press Enter again to enter the IP address of the host PC that runs the D6200 Software
Notice!
When entering an IP address through the keypad of the D6100i, press an alpha character ([A]
i
to [F]) to enter a decimal point in the IP address. For example, enter IP address
202.96.168.127 as:
[2][0][2][A][9][6][A][1][6][8][A][1][2][7][ENTER].
16. Press the Down button to view 6.4.5 Network Programming Enable. Verify that the value
17. Press Cancel repeatedly to return to the idle stage (time and date show on the LCD).
Bosch Security Systems, Inc.
is 1. If the value is not 1, press Enter [1] Enter.
Installation and Operation Guide
Network Communications | en
2012.11 | 08 | 4998122704
71