Bosch Conettix D6600 Installation And Operation Manual page 61

Conettix Communications Receiver/
Gateway
Config Config
Section Sub-
section
interface eth0
interface eth0
Bosch Security Systems, Inc.
Config Default
Parameter Value
dhcp enable
ip address <None
>
Installation and Operation Guide
Valid Values Description
enable, disable Determines if IPv4 DHCP is used. If this is set
to disabled, then a Static IPv4 Address needs
to be specified in the IP Address
Configuration Parameter.
Accepts an If IPv4 DHCP is disabled, then an IPv4
IPv4 address Address must be entered here.
and mask as
either:
1 IP address
only
(192.168.1.1)
gets a default
mask,
2 CIDR
(192.168.1.1/2
4),
3 Explicit mask
(192.168.1.1
255.255.255.0
)
Network Communications | en
2012.11 | 08 | 4998122704
61