Conettix Communications Receiver/
Gateway
As you correct system troubles, the receiver removes them from this list. The system trouble
light is no longer illuminated. Refer to Troubleshooting Guide, page 77 for more information.
11.4.5
Software Version Display
The software version display indicated the current software versions of the CPU and each line
card.
11.4.6
Keypad Functions
Use keypad functions to quickly and easily access certain features and run commands, or
functions, from the keypad.
Accessing functions:
1.
2.
Notice!
i
D6600 default password: 6600
D6100IPv6 default password: 6100
3.
4.
5.
Communication Links Test (Function 1)
Use this function to test the communication links to the automation firmware and printer.
Running the Communication Links Test function:
1.
2.
3.
Communication Links Test Outputs
Printer
Automation
Skip Current Automation Event (Function 2)
Use this option to skip the current Automation event.
Running the Skip Current Automation function:
1.
2.
Line Test (Function 3)
Use this option to test the line operation.
Running the Line Test function:
1.
2.
3.
Bosch Security Systems, Inc.
Press the Function key.
Enter your password.
Press the Enter key to go to the Welcome Manager.
Press the number key for the function you wish to run. For example, press the [1] key.
Press the Enter key. The function runs.
Press the Function key.
Enter your password and press the Enter key to go to the Welcome Manager.
Press [1] and Enter.
DD/DDsTT:TTsL08sACCTs888sss
[TEST]s2Nsss8
6500 Mode h1rr8sssssss888s[sss8t
SIA Mode <header>[NVX]
Press the Function key. Enter your password and press the Enter key to go to the
Welcome Manager.
Press [2] and Enter.
Press the Function key. Enter your password and press the Enter key to go to the
Welcome Manager.
Press [3] and Enter.
Press the number key for the line you wish to test. The line disconnects, the receiver
sends the handshakes, and the line reconnects.
Installation and Operation Guide
D6600/D6100IPv6 Operation | en
2012.11 | 08 | 4998122704
37