Configuration Information - Factory Integrated Models - HP ProLiant BL465c Specification
Generation 8 server blade
Hide thumbs
Also See for ProLiant BL465c:
- User manual (92 pages) ,
- Quickspecs (28 pages) ,
- Installation instructions (3 pages)
Table of Contents
Advertisement
QuickSpecs
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model (configure-to-order or CTO server). To
ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: Configure-to-order server blades must start with a CTO Blade Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
HP Models
Step 2: Choose Required Options (one of the following from each list unless otherwise
noted)
HP Processors
HP ProLiant BL465c Gen8 10Gb FlexibleLOM Configure-to-order Blade Server
Configurable Model ships with:
One (1) FlexibleLOM connector providing a choice of supported 10Gb FlexibleLOMs (see
Step 2)
One (1) HP Smart Array P220i Controller with 512MB FBWC and RAID 0 and 1 support
Two (2) HP small form factor hot-plug SAS/SATA/SSD hard drive bays
One (1) x8 PCIe I/O expansion slot (Type A)
One (1) x16 PCIe I/O expansion slot (Type A or Type B)
One (1) integrated USB connector and one (1) Micro SDHC connector
One (1) TPM connector
HP iLO Management Engine (standard)
For single processor configuration choose:
Core Processor Option Kits
NOTE: The BL465c Gen8 supports one or two processors.
NOTE: All configure-to-order processor kits (i.e. xxxxxx-L21) contain one (1) processor.
NOTE: If two processors are desired, select one xxxxxx-L21 here in Step 2 and one
xxxxxx-B21 in Step 3.
NOTE: All processors within the server must be identical.
NOTE: The letters "HE" following the model number denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the
maximum speed memory can operate. Please see the see the "Memory" section later in
this document.
Sixteen-Core Processors
HP BL465c Gen8 AMD Opteron™ 6380 (2.5GHz/16-core/16MB/115W) FIO Processor Kit
HP BL465c Gen8 AMD Opteron™ 6378 (2.4GHz/16-core/16MB/115W) FIO Processor Kit
HP BL465c Gen8 AMD Opteron™ 6376 (2.3GHz/16-core/16MB/115W) FIO Processor Kit
HP BL465c Gen8 AMD Opteron™ 6366HE (1.8GHz/16-core/16MB/85W) FIO Processor
Kit
HP BL465c Gen8 AMD Opteron™ 6276 (2.3GHz/16-core/16MB/115W) FIO Processor Kit
Twelve-Core Processors
HP BL465c Gen8 AMD Opteron™ 6348 (2.8GHz/12-core/16MB/115W) FIO Processor Kit
HP BL465c Gen8 AMD Opteron™ 6344 (2.6GHz/12-core/16MB/115W) FIO Processor Kit
Eight-Core Processors
HP BL465c Gen8 AMD Opteron™ 6328 (3.2GHz/8-core/16MB/115W) FIO Processor Kit
DA - 14325 North America — Version 16 — December 13, 2013
HP ProLiant BL465c Generation8 (Gen8) Server Blade
634975-B21
699048-L21
699049-L21
699050-L21
699056-L21
634970-L21
699051-L21
699052-L21
699053-L21
Page 20
Advertisement
Table of Contents
