Advertisement
QuickSpecs
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
NOTE:
NOTE:
NOTE:
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE:
NOTE:
NOTE: HP does not allow factory integration of options into standard models listed above.
NOTE:
Configure-to-order servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is a Factory Installable Option.
NOTE:
NOTE:
NOTE:
Step 1: Base Server Blade Configuration
Step 1: Base Server Blade Configuration
Step 1: Base Server Blade Configuration
Step 1: Base Server Blade Configuration
HP Models
HP Models
HP Models
HP Models
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HP Processors
HP Processors
HP Processors
HP Processors
HP Memory
HP Memory
HP Memory
HP Memory
HP ProLiant BL465c G7 CTO Blade
Configurable Model ships with:
Configurable Model ships with:
Configurable Model ships with:
Configurable Model ships with:
One (1) integrated HP NC551i Dual Port FlexFabric 10Gb Converged Network
Adapter and one (1) additional 10/100 server adapter dedicated to iLO 3
management
Two (2) small form factor (SFF) SAS/SATA/SSD hot plug drive bays
HP Integrated Lights-Out 3 (iLO 3)
For single (1) processor configuration choose (one of the following):
For single (1) processor configuration choose (one of the following):
For single (1) processor configuration choose (one of the following):
For single (1) processor configuration choose (one of the following):
NOTE:
NOTE: If two (2) processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
NOTE:
NOTE:
Twelve-Core Processors
Twelve-Core Processors
Twelve-Core Processors
Twelve-Core Processors
AMD Opteron processor Model 6174 (2.2 GHz, 12 MB L3 Cache, 80W ACP)
Processor Option Kit, FIO Base
AMD Opteron processor Model 6172 (2.1 GHz, 12 MB L3 Cache, 80W ACP)
Processor Option Kit, FIO Base
Low Power AMD Opteron processor Model 6164 HE (1.7 GHz, 12 MB L3 Cache,
65W ACP) Processor Option Kit, FIO Base
Eight-Core Processors
Eight-Core Processors
Eight-Core Processors
Eight-Core Processors
AMD Opteron processor Model 6136 (2.4 GHz, 12 MB L3 Cache, 80W ACP)
Processor Option Kit, FIO Base
AMD Opteron processor Model 6134 (2.3 GHz, 12 MB L3 Cache, 80W ACP)
Processor Option Kit, FIO Base
Low Power AMD Opteron™ processor Model 6128 HE (2.0 GHz, 12 MB L3 Cache,
65W ACP) Processor Option Kit, FIO Base
Registered DIMMs (RDIMMs)
Registered DIMMs (RDIMMs)
Registered DIMMs (RDIMMs)
Registered DIMMs (RDIMMs)
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
Unbuffered with ECC DIMMs (UDIMMs)
Unbuffered with ECC DIMMs (UDIMMs)
Unbuffered with ECC DIMMs (UDIMMs)
DA - 13654
Worldwide — Version 3 — June 24, 2010
HP ProLiant BL465c Generation 7 (G7) Server Blade
HP ProLiant BL465c Generation 7 (G7) Server Blade
HP ProLiant BL465c Generation 7 (G7) Server Blade
HP ProLiant BL465c Generation 7 (G7) Server Blade
518857-B21
518860-L21
518852-L21
596207-L21
518855-L21
518863-L21
518868-L21
593911-B21
604500-B21
593913-B21
604502-B21
593915-B21
Page 19
Advertisement
