Configuration Information - Factory Integrated Models - HP ProLiant XL230a Gen9 Quickspecs

QuickSpecs
Configuration Information – Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations
are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: HP Apollo a6000 Chassis and HP Apollo 6000 Power Shelf are required to support the server. Refer to their QuickSpecs for
additional information.
HP Apollo 6000 Power Shelf
http://h18000.www1.hp.com/products/quickspecs/14976_na/14976_na.html
HP Apollo a6000 Chassis
http://h18000.www1.hp.com/products/quickspecs/14974_na/14974_na.html
Step 1: Base Configuration (Choose one of the CTO Models below)
HP CTO Model HP ProLiant XL230a Gen9 Compute Tray (6G)
HP ProLiant XL230a Gen9 Compute Tray (12G)
HP ProLiant XL230a Gen9 NHP Compute Tray (12G)
NOTE: Select one "-L21" processor and a matching "-B21" processor in step 2.
Step 2: Choose Required Options (only one from each category unless otherwise noted)
HP Processors HP XL2x0 Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2683v3 (2.0GHz/14-core/35MB/120W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2643v3 (3.4GHz/6-core/20MB/135W) FIO Processor Kit*
HP XL2x0 Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2637v3 (3.5GHz/4-core/15MB/135W) FIO Processor Kit*
HP XL2x0 Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) FIO Processor Kit
HP XL2x0 Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W) FIO Processor Kit
NOTE: All processors within the server must be identical.
NOTE: Mixing different processor models are not supported.
NOTE: The letter "L" following the processor model number denotes lower wattage.
*NOTE: Some processors will limit the system's inlet ambient support to 25°C
NOTE: The processor model as well as the memory configuration determines the
maximum speed memory can operate. Please see the see the "Memory" section later in
this document.
NOTE: For the maximum supported memory speeds for each processor listed above,
please reference the 'Memory Speed by Processor Model' table in the Memory section of
the QuickSpecs.
NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
c04390759 - DA – 15055 – NorthAmerica— Version 5— April 17, 2015
HP ProLiant XL230a Gen9 Server
785996-B21
789917-B21
785695-B21
790710-L21
768604-L21
768600-L21
768602-L21
768598-L21
768596-L21
768594-L21
768592-L21
799859-L21
768590-L21
799861-L21
768588-L21
768586-L21
768582-L21
768560-L21
768618-L21
768614-L21
Page 13