HP ProLiant BL465c Specification page 4

QuickSpecs
Standard Features
Network Controller
Expansion Slots
NOTE: Supports one of the following FlexibleLOMs and iLO Management.
One (1) HP FlexFabric 10Gb 2-port 554FLB FlexibleLOM
NOTE: Supports FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot, and
autosensing 10Gb/1Gb Ethernet.
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class
interconnect components. Both ports will operate at the same speed.
NOTE: FlexFabric capabilities require the use of an HP Virtual Connect FlexFabric module. Fibre Channel
over Ethernet (FCoE) is supported with the HP 10GbE Pass-Thru Module, HP 6120XG Blade Switch with the
CEE license installed, HP Cisco B22HP Fabric Extender and HP Cisco B22HP Fabric Extender with 16 FET for
BladeSystem c-Class. Learn more at www.hp.com/go/virtualconnect.
One (1) HP Flex-10 10Gb 2-port 530FLB FlexibleLOM
One (1) HP Ethernet 10Gb 2-port 560FLB FlexibleLOM
NOTE: FlexibleLOMs are not compatible with prior generation c-Class server blades
Standard iLO Network Controller:
One (1) 10/100 Mbps port for the HP iLO 4 On System Management Chipset
One (1) 10/100 Mbps port for the HP iLO 4 to Onboard Administrator link. The Onboard Administrator (with
10/100/1000 Mbps) to BladeSystem link is 1Gbps.
Two (2) I/O expansion mezzanine slots:
x8 PCIe 2.0 Type A (supports Type A mezzanine cards) (expansion slot 1).
NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed to interconnect
module bay 3 and the other to bay 4.
x16 PCIe 2.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2).
NOTE: This expansion slot supports dual-port and quad-port mezzanine cards. For dual-port cards,
one port is routed to interconnect module bay 5 and the other to bay 6. For quad-port cards, one
port is routed to interconnect module bay 5, one to bay 6, one to bay 7, and one to bay 8.
Mezzanine card options include:
Dual-port 10Gb FlexFabric,10Gb Flex-10, 10GbE options, and quad-port 1Gb Ethernet server
adapter mezzanine options for additional network ports
Dual-port 8Gb Fibre Channel HBA for SAN connectivity
QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity
I/O accelerator mezzanine options for high transaction rate local storage
Smart Array SAS RAID controller mezzanine options for external direct attach and shared SAS
storage
DA - 14325 North America — Version 16 — December 13, 2013
HP ProLiant BL465c Generation8 (Gen8) Server Blade
Page 4