Configuration Information - Factory Integrated Models; Base Configuration; Choose Required Options - HP ProLiant DL360 Generation9 Quickspecs

QuickSpecs

Configuration Information - Factory Integrated Models

This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, Hewlett Packard Enterprise recommends the use of an Hewlett Packard Enterprise approved configurator. Contact your
local sales representative for information on configurable product offerings and requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.
Step 1: Base Configuration (choose one of the following configurable models)
CTO Server HPE ProLiant DL360 Gen9 4LFF Configure-to-order
SKU Number
Processor
DIMM Slots
Storage
Controller
PCIe
Drive Cage
Network
Controller
Fans
Management
USB
Ears
NOTE: 4LFF CTO Server includes 1 SATA Cable, option kit: 766213-B21, which attaches to the B140i controller.
NOTE: 8SFF CTO Server includes two 4 x Mini-SAS Cables, option kit: 766209-B21, which attaches to an optional HPE Smart
HBA H240ar or HPE Smart Array P440ar controller.
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
HPE Processors E5-2600v4 Series Processors
HPE DL360 Gen9 Intel® Xeon® E5-2630Lv4 (1.8GHz/10-core/25MB/55W) FIO Processor Kit 818164-L21
HPE DL360 Gen9 Intel® Xeon® E5-2650Lv4 (1.7GHz/14-core/35MB/65W) FIO Processor Kit 818166-L21
HPE DL360 Gen9 Intel® Xeon® E5-2603v4 (1.7GHz/6-core/15MB/85W) FIO Processor Kit
HPE DL360 Gen9 Intel® Xeon® E5-2609v4 (1.7GHz/8-core/20MB/85W) FIO Processor Kit
HPE DL360 Gen9 Intel® Xeon® E5-2620v4 (2.1GHz/8-core/20MB/85W) FIO Processor Kit
HPE DL360 Gen9 Intel® Xeon® E5-2623v4 (2.6GHz/4-core/10MB/85W) FIO Processor Kit
HPE DL360 Gen9 Intel® Xeon® E5-2637v4 (3.5GHz/4-core/15MB/135W) FIO Processor Kit
HPE DL360 Gen9 Intel® Xeon® E5-2643v4 (3.4GHz/6-core/20MB/135W) FIO Processor Kit
HPE DL360 Gen9 Intel® Xeon® E5-2640v4 (2.4GHz/10-core/25MB/90W) FIO Processor Kit
HPE DL360 Gen9 Intel® Xeon® E5-2650v4 (2.2GHz/12-core/30MB/105W) FIO Processor Kit 818178-L21
HPE DL360 Gen9 Intel® Xeon® E5-2660v4 (2.0GHz/14-core/35MB/105W) FIO Processor Kit 818180-L21
HPE DL360 Gen9 Intel® Xeon® E5-2697Av4 (2.6GHz/16-core/40MB/145W) FIO Processor
Kit
Server
755259-B21
2 (optional) x HPE Smart Socket Guide
24 DIMM slots for RDIMM, LRDIMM DDR4 Memory
HPE Dynamic Smart Array B140i
2 PCIe 3.0 Slots: Slot 1, FH / ¾ Length; Slot 2, Low Profile
4LFF Hot Plug
HPE Embedded 1Gb Ethernet 4-port 331i Adapter
5 standard hot plug fans, redundant
iLO Management (standard), Intelligent Provisioning (standard)
1 front, 2 internal, 2 rear
HPE Quick Release Ears
HPE ProLiant DL360 Generation9 (Gen9)
HPE ProLiant DL360 Gen9 8SFF Configure-to-
order Server
755258-B21
8SFF Hot Plug
818168-L21
818170-L21
818172-L21
818190-L21
818192-L21
818194-L21
818176-L21
818182-L21
Page 23