Configuration Information - Factory Integrated Models - HP ProLiant DL380 Generation9 Quickspecs

QuickSpecs

Configuration Information - Factory Integrated Models

This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for
information on configurable product offerings and requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered
with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.
Step 1: Base Configuration (choose one of the following configurable models)
CTO Server HP ProLiant DL380
Models Gen9 8SFF
Configure-to-order
Server
SKU Number 719064-B21
Processor
DIMM Slots
Storage HPE Dynamic Smart Array B140i, plus optional HPE Flexible Smart Array or Smart HBA controller
Controller
PCIe
Drive Cage 8SFF Hot Plug
(+8SFF and Universal
Media Bay Optional)
Network HPE Embedded 1Gb
Ethernet 4-port 331i
Controller
Adapter, plus
optional HPE Flexible
LOM or stand up
card
Fans 4 hot plug fans,
redundant
Management
USB 1 front, 2 internal, 2
rear
Ears
NOTE: With the NVMe CTO Server (810393-B21) there are limitations on GPU support.
NOTE: The NVMe CTO Server (810393-B21) ships with the standard x8 Risers supporting 2xNVMe drives.
Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)
HPE Processors Entry Processors – E5-2600v4 series Processors
HP DL380 Gen9 Intel® Xeon® E5-2650Lv4 (1.7GHz/14-core/35MB/65W) FIO
Processor Kit
HP DL380 Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/10-core/25MB/55W) FIO
Processor Kit
HP ProLiant
DL380 Gen9
NVMe 6 Solid State
Drive Express Bay
Configure-to-order
Server
810393-B21
2 (optional) x HPE Smart Socket Guide
24 DIMM slots for RDIMM, LRDIMM DDR4 Memory
3 PCIe slots (+3 PCI slots available with upgrade option, second processor required)
8SFF +6NVMe Hot
Plug (+8SFF or
Universal Media
Bay Optional)
HPE Embedded
1Gb Ethernet 4-
port 331i Adapter
6 hot plug high performance fans,
redundant
iLO Management (standard), Intelligent Provisioning (standard)
1 front, 1 internal, 2
rear
HPE ProLiant DL380 Generation9 (Gen9)
HP ProLiant
DL380 Gen9 DL380 Gen9 4LFF
24SFF Configure- Configure-to-order
to-order Server
767032-B21
24SFF Hot Plug 4LFF Hot Plug
HPE Embedded 1Gb Ethernet 4-port 331i Adapter, plus optional
HPE Flexible LOM or stand up card
4 hot plug fans,
1 front, 2 internal, 2
rear
HPE Quick Release Ears
HP ProLiant HP ProLiant DL380
Gen9 12LFF
Configure-to-order
Server Server
767033-B21 719061-B21
12LFF Hot Plug
6 hot plug high
redundant performance fans,
redundant
No front USB support
817941-L21
817931-L21
Page 27