Table of Contents
Advertisement
QuickSpecs
Configuration Information-Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration
Models
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
Processors
Memory
HP ProLiant ML110G5 NHP CTO Chassis
Factory Integrated Models ship with:
Embedded NC105i PCI Express Gigabit Ethernet Server Adapter
Keyboard and Mouse
NOTE: Keyboard and Mouse option needs to be manually selected for shipment.
Please see the USB Options listed in the options selection of this QuickSpecs.
Power cord
Micro ATX Tower (4U)
NOTE: HP SATA drive models are limited to 3.0TB support.
NOTE: On SATA models with embedded RAID, setup instructions are located in
the User Guide. CTO RAID set-up is not available. HP ProLiant ML100 Series
Server User Guide:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00260539/
c00260539.pdf
Quad-Core Processor
Intel® Xeon® processor X3370 (3.00GHz, 95W, 1333MHz FSB, 12MB), FIO
Intel® Xeon® processor X3360 (2.83GHz, 95W, 1333MHz FSB, 12MB), FIO
Intel® Xeon® processor X3330 (2.66 GHz, 95W, 1333 MHz FSB, 6MB), FIO
Intel® Xeon® Processor X3220 (2.40 GHz, 95W, 1066 MHz FSB, 8MB), FIO
Intel® Xeon® Processor X3210 (2.13 GHz, 95W, 1066 MHz FSB, 8MB), FIO
Dual-Core Processor
Intel® Xeon® processor E3120 (3.16 GHz, 65W, 1333 MHz FSB, 6MB), FIO
Intel® Xeon® processor E3110 (3.00 GHz, 65W, 1333 MHz FSB,6MB),FIO
Intel® Core™ 2® processor E7400 (2.80 GHz, 65W, 1066MHz FSB, 3MB), FIO
Intel® Pentium ® processor E5200 (2.50 GHz, 65W, 800MHz FSB, 2MB), FIO
Intel® Pentium® processor E2160 (1.8GHz, 65W, 800 MHz FSB, 1MB), FIO
Single-Core Processor
Intel® Celeron® processor 440 (2.0GHz, 35W, 800 MHz FSB, 512KB), FIO
2 GB Unbuffered PC2-6400 ECC DIMM (1 x 2 GB)
1 GB Unbuffered PC2-6400 ECC DIMM (1x1 GB)
512 MB Unbuffered PC2-6400 ECC DIMM(1x512 MB)
DA - 12867 U.S. QuickSpecs — Version 25 — 9-28-2009
HP ProLiant ML110 Generation 5
445607-B21
535026-L21
493261-L21
493259-L21
455069-L21
455068-L21
492973-L21
464376-L21
533838-L21
533836-L21
450359-L21
455072-L21
450260-B21
450259-B21
450258-B21
Page 12
Advertisement
Table of Contents
