Configuration Information - Factory Integrated Models - HP ProLiant BL495c Generation 6 (G6) Quickspecs And Dimenions

QuickSpecs

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are NOTE: NOTE: NOTE:
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: NOTE: NOTE: HP does not allow factory integration of options into standard models listed above. NOTE:
Configure-to-order servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is a Factory Installable Option. NOTE: NOTE: NOTE:
Step 1: Base Server Blade Configuration Step 1: Base Server Blade Configuration Step 1: Base Server Blade Configuration Step 1: Base Server Blade Configuration
HP Models HP Models HP Models HP Models
Step 2: Choose Required Options (one of the following from each list unless otherwise noted) Step 2: Choose Required Options (one of the following from each list unless otherwise noted) Step 2: Choose Required Options (one of the following from each list unless otherwise noted) Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HP Processors HP Processors HP Processors HP Processors
HP Memory HP Memory HP Memory HP Memory
HP ProLiant BL495c G6 Configure-to-order Server
Configurable Model ships with: Configurable Model ships with: Configurable Model ships with: Configurable Model ships with:
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter and one
(1) additional 10/100 server adapter dedicated to iLO 2 management
HP Embedded SATA Controller
Two (2) non-hot plug internal SATA SSD drive bays
HP Integrated Lights-Out 2 (iLO 2) management processor
For single processor configuration choose: For single processor configuration choose: For single processor configuration choose: For single processor configuration choose:
NOTE: If two (2) processors are desired, select one xxxxxx-L21 and one xxxxxx-B21. NOTE: NOTE: NOTE:
AMD Opteron™ 2435 2.60GHz Six Core 75 Watts BL495c G6 Factory Integrated
Processor Option Kit
AMD Opteron™ 2427 2.20GHz Six Core 75 Watts BL495c G6 Factory Integrated
Processor Option Kit
AMD Opteron™ 2425HE 2.10GHz Six Core 55 Watts BL495c G6 Factory Integrated
Processor Option Kit
HP 2GB (2x1GB) Single Rank PC2-6400 (DDR2-800) Registered Memory Kit
HP 4GB (2x2GB) Single Rank PC2-6400 (DDR2-800) Registered Memory Kit
HP 8GB (2x4GB) Dual Rank PC2-6400 (DDR2-800) Registered Memory Kit
HP 8GB (2x4GB) Dual Rank x4 PC2-6400 (DDR2-800) Registered Low Power
Memory Kit
HP 16GB (2x8GB) Dual Rank PC2-5300 (DDR2-667) Registered Memory Kit
HP 64GB (8x8GB) Dual Rank PC2-5300 (DDR2-667) Registered Memory Kit
NOTE: NOTE: NOTE: Must be installed in pairs. NOTE:
NOTE: The memory bus will operate at 800 MHz with four (4) or fewer DIMMs per NOTE:
NOTE: NOTE:
processor, 667 MHz with six (6) DIMMs per processor, and 533 MHz with eight (8)
DIMMs per processor.
DA - 13346 Worldwide — Version 13 — January 10, 2011
HP ProLiant BL495c Generation 6 (G6) Server Blade HP ProLiant BL495c Generation 6 (G6) Server Blade HP ProLiant BL495c Generation 6 (G6) Server Blade HP ProLiant BL495c Generation 6 (G6) Server Blade
539810-B21
539805-L21
539808-L21
539812-L21
497763-B21
497765-B21
497767-B21
504351-B21
408855-B21
495605-B21
Page 15