Features - ATCOM at810 User Manual

AT810 Series User Manual
In manual mode, IP phone will resume to the manual time value after a reboot or
power off.

5.5.2 Features

5.5.2.1 Speed Dial
Set speed dial number for 2-9. For example, set 6750 for key 2, then user can call 6750
by call 2.
5.5.2.2 Call Forward
 Always Target: To set a target number that forward all the incoming call to.
 Busy Target：To set a target number that forward the incoming call when user's
phone is busy.
 No Answer: To set a target number that forward the incoming call when no one
answer it.
 After Ring Time (Seconds): Forward the incoming call to the no answer target after
the time that set here. Default to 5 seconds. Range from 3~60 s.
If Always forward, Busy forward and No answer forward are both enabled, IP phone will
implement always forward by priority. That is to say, all incoming calls will be forwarded
to the always target number.
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
33