Feet Installation Instruction; Desktop Position - ATCOM at810 User Manual

AT810 Series User Manual
 Click on "admin" to configure under admin mode.
The default username is admin for administrator and user for user. They were defaults
with no password. User can set it in the webpage.

1.11 Feet installation instruction

1.11.1 Desktop position

Put the bottom side of the IP phone upside and press the plate with letter "PUSH" into
the slot, please refer the picture as below:
A. Press the other plate into the slot in accordance with the direction of the arrow.
B. Repeat A and B. It is the right picture of putting on desk after fixing the two feet
below:
C. Disassemble the feet:
Press the plate with word "PUSH" and pull the feet with the direction of arrow. When the
plate is pull out of the slot (there will be a sound of "pa") user can take off the feet.
10
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn