Installation Installation and and access access access access � � � � Installation Installation Installation Installation Set up AT810 as below: � � � � Feet Feet Feet i i i i nstallation nstallation nstallation instruction instruction Feet nstallation instruction instruction 1、Desktop position:...
Page 4
A、Put the bottom side of the IP phone upside and push the plate with letter “PUSH” into the slot, please refer the picture as below: B、Push the other plate into the slot in accordance with the direction of the arrow ATCOM TECHNOLOGY CO., LIMITED...
Check Check Check IP If AT810 is connect to your network. AT810 WAN default to use DHCP, and after connect WAN to Switch, it will obtain IP automatically. Press "Info" you will see AT810's current IP, Current Gateway and UserID.
Modify your computer’s IP address to the same network as AT810. Enter AT810 IP addresses in the web browser to go to the login page, then you will access AT810's user webpage. Click "admin" which is on the right corner to enter administrator webpage.
AT810 Quick Quick Start Start Guide Guide gateway and DNS information. PPPoE: If connect AT810 to modem, you should fill ADSL account and the � password which assigned by your network service provider. � � � � Set password password...
Page 8
� Outbound Proxy Port: Set your proxy server port. � Register Expires: register expire time, default is 60 seconds. AT810 will auto configure this expire time to the server recommended setting if it is different from the SIP server. �...