Normal Rec Mode Set - Sanyo DSR-3709P Manual

2 MENU-SPECIFIC SETTINGS
When setting has been completed, all data with expired
storage periods are deleted. Before setting, copy
important data to the archive area or CompactFlash
card.
Archive area data is excluded when auto delete is run.
6
Click [SAVE].
The new setting is saved.

6. NORMAL REC MODE SET

Set conditions for normal recording and timer recording as
described below.
NORMAL REC MODE SET
1
PICTURE QUALITY
2
AUDIO RECORDING
REC RATE
3
REC PROGRAM GROUP :
4
5
Setting the picture quality for recording
Set the picture quality for recording to the normal recording
area as follows.
1
Select "PICTURE QUALITY" from the
pull-down menu on the screen.
[Settings] ( indicates default setting)
Setting
BASIC Basic
NORMAL Normal
ENHANCED Enhanced
FINE Fine
SUPER FINE Super Fine
English
:
ENHANCED
:
OFF
: ( 42H )
A 12.5 FPS
OFF
SAVE
Description
Setting audio recording
Audio can be recorded together with images when
performing normal recording.
Note, however, that since this audio data will also be
stored in the normal recording area, the recording time for
this area will be reduced.
2
Select "AUDIO RECORDING" from the
pull-down menu on the screen.
[Settings] ( indicates default setting)
Setting
OFF Audio will not be recorded.
ON Audio will be recorded.
Audio recording is possible when the recording rate is
between A50 and A1FPS.
When the recording rate is set to a value outside this
range, audio is not recorded even when "AUDIO
RECORDING" is set to "ON".
Setting the recording rate
Set the recording rate for normal recording as follows.
3
Select "REC RATE" for normal
recording from the pull-down menu on
the screen.
[Settings] ( indicates default setting)
A50, A25, A16.67,
Audio recording A5, A4.167, A3.571, A3.125, A2.778, A2.5,
is carried out A2.273, A1.923, A1.667, A1.471, A1.316,
A1.190, A1.087, A1
Audio recording
0.5, 0.333, 0.25, 0.2, 0.1, 0.05, 0.033
is not carried out
The letter "A" will be displayed in front of recording rates
that can be set for audio recording.
Selecting setting values
Image resolution is determined by the product of picture
quality and recording rate. The higher the picture quality
and the faster the recording rate, the better the image
resolution; however, as higher resolution requires more
storage capacity, the recording time will be reduced
accordingly.
The recording rate will be limited between A25 and
0.033 FPS when the setting for pre-alarm recording is
"ON".
"REC RATE" for timer recording should be set
separately using the TIMER SET menu. ( P. 33)
31
Description
A12.5, A8.333, A6.25,