Table of Contents
Advertisement
RECORDING SETTING
PROGRAM REC SET menu
D
Recording for particular cameras only can be carried out by specifying
those cameras. Programs from no. 1 to no. 4 can be set. For
example, program no. 1 could be set to record images from cameras
1 to 4 only, and program no. 2 could be set to record images from
cameras 3 to 9. In addition, these programs can be used during timer
recording and pre-alarm recording also.
Display examples:
To set program no. 1 to record only images from cameras 1 to 3
Only images (1 – 3) from selected
cameras are recorded
1
2
1
P-1
Select a program number from 1 to 4.
2
SELECT INDIVIDUAL CAMERA RATE (FPS)
Select the cameras to be recorded from the connected cameras 1
to 16). The recording speed can also be set for each camera.
(PROGRAM REC RECORDING RATE see page 90.)
Note: The maximum speed for program recording is 25 FPS. The
maximum speed for each camera is 25 FPS divided by the
number of cameras that are set to "ON". For example, if 10
cameras have been set to "ON", the maximum speed for each
camera will be 2.5 FPS.
Example: To set program no. 1 to record only
images from cameras 1, 2 and 3
For the DSR-3009P model, you can select cameras from 1 to 9.
MENU
1
Press the MENU button to select RECORD SET, and then turn
the shuttle dial clockwise.
The RECORD SET sub-menu appears, and the cursor is
positioned at RECORDING AREA SET.
2
Use the jog dial to move the cursor to PROGRAM REC SET,
and then turn the shuttle dial clockwise.
The PROGRAM REC SET sub-menu appears, and the cursor is
positioned at P-1.
English
3
Turn the shuttle dial clockwise, use the jog dial to set the
program number (example: P-1), and then turn the shuttle dial
clockwise.
The cursor moves to 01.
4
Turn the shuttle dial clockwise.
"0.313" (camera number) flashes.
5
Turn the shuttle dial clockwise, use the jog dial to set the
recording speed (example: 0.521), and then turn the shuttle
dial clockwise.
Camera 1 will record at a speed of 0.521. The cursor then moves
to "02".
6
Repeat the above procedure to set the recording speeds for
cameras 2 and 3.
7
With the cursor at "04" (camera number), use the jog dial to
change the setting to "OFF" , and then turn the shuttle dial
clockwise.
Images from camera 4 will not be recorded.
8
Repeat the above procedure to set cameras 5 to 16 to "OFF" .
9
Repeat the above procedure to make settings for other
program numbers (2 to 4).
10
Press the EXIT/OSD button.
The display returns to the normal screen.
EXIT/OSD
55
Advertisement
Table of Contents
