Pioneer DVR-LX61D Operating Instructions Manual page 56

Using the digital electronic programme guide
06
1
(UK only) – Choose whether or not
EPG Link
to have this device automatically record
scheduled programmes from the Digital
EPG even if the times in which they are
broadcast change.
Series Recording
whether or not to record all programmes
from a series when you make a recording
from the Digital EPG (for HDD recordings
only).
5 After entering all the timer recording
information, highlight 'Store
Programme' and press ENTER.
A red clock icon appears for the programme.
GUIDE
6 Press to exit the Digital EPG
screen.
Tip
• To enter a title name for the timer
recording in advance, select Set Title
Name and follow the on-screen display.
Editing a timer programme
You can change any of the settings in a timer
programme before the recording is due to
start. Even if a programme is currently being
recorded, you can program a new end time
or edit its extend time parameter.
TIMER REC
1 Press to display the Timer
Programme View screen.
You can also access the Timer Programme
View screen from the Home Menu (press
HOME MENU, select Timer Recording,
then Timer Recording).
Note
1 • You cannot set an EPG Link when recording mode is set to AUTO.
• You cannot change the CH, Date, Start, Stop, Extend and title name when you have EPG Link set to On.
• When you have EPG Link set to On and you set a timer recording for a programme that is divided into multiple
parts, all parts of that programme are recorded automatically. In the programme list, the earliest part of the
programme to be recorded has a red
by the broadcaster determines which programmes are classified as divided programmes.
2 • In the programme list, the earliest programme to be recorded has a red
indicated by a gray
• There is a limit to the number of programmes you can schedule to record with the Series Recording function.
56
• Data provided by the broadcaster determines which programmes are classified as part of a series.
En
2
(UK only) – Choose
icon, with successive parts indicated by a gray
icon.
This screen shows all the timer programmes
currently set.
Timer Programme View
Manhattan Open Tennis
SUN 25/3 18:00 – 19:00
World Journey
MON 26/3 19:30 – 21:00
Flower
MON – FRI 13:30 – 14:00
HDD Remain
DVD Remain
• Each row is for one timer recording
programme, with the date and time
information, channel, recording mode,
DVD or HDD and recording status.
• The amount of free space available on
the HDD and the currently loaded
recordable DVD is shown towards the
bottom of the screen.
• In the upper-right corner, the number of
timer programmes already set is shown
next to Tmr Pgms.
• If there are more than five timer
programmes already set, press
 NEXT to switch page (go back using
the  PREV button).
• You can also delete a timer programme
before it's started (before the recorder
enters timer recording standby) by
highlighting it and pressing CLEAR. See
also Deleting a timer programme on
page 58.
2 Highlight the timer programme
you want to change.
If you want to set a new timer programme,
select 'New Input' and skip to step 4.
icon, with successive programmes
SUN 25/3 15:00
VPS/PDC 0/8 Tmr Pgms 3/32
OK
Pr 4
OK
Pr 6
Until 20/4
Pr 8
New Input
59h59m(SP)
1h59m(SP)
icon. Data provided