P
I
RODUCT
NFORMATION
DRM-7000 – 2 Readers/2 Recorders Configuration
This document provides a recommended configuration when using two ROM drives (readers) and two writer drives
(recorders) for the Pioneer DRM-7000 FlexLibrary. Please refer to the manuals shipped with the unit for more
information.
Installation Check List
The following components are required for this configuration:
• (2) DVD-D7563 or DVD-D7362/7361 DVD/CD-ROM internal read drives
• (2) DVD-R7322 or DVD-R7211 Internal DVD-Recordable drive
• (2) DRM-SN711 Single drive rear panel SCSI connector
• (1) DDG1006 SCSI Loop cable (shipped with DRM-7000)
Recommended Drive Arrangement
Pioneer recommends the following drive arrangement however alternative configurations are available if additional
components are required. For best results, use a separate SCSI channel for each recordable drive.
Additional Information
For further assistance with this library system, please refer to the Pioneer website:
www.pioneerelectronics.com.
Pioneer Electronics (USA) Inc., Engineering Support
B
ULLETIN
Bulletin # 260812
Page 1 of 1
(800) 421-1613