Pioneer DVR-LX61D Operating Instructions Manual page 141

The Initial Setup menu
Setting Options
Bilingual A/L •
Recording
B/R
When recording bilingual audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format
set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the one you
want on playback.
DV Input Stereo 1 •
Stereo 2
Mix
Audio Out
Dolby Digital Dolby
Out Digital •
Dolby Digital
 PCM
DTS Out On •
Off
96 kHz 
96 kHz PCM Out
48 kHz •
96 kHz
MPEG Out MPEG
MPEG 
PCM •
Audio DRC On
Off •
Audio DRC is not effective when listening via the digital output when the Dolby Digital Out setting is set to Dolby
Digital.
Explanation
Record the left (A) channel of a bilingual source when
recording to HDD with HDD Recording Format set to Video
Mode On, to DVD-R/-RW (Video mode) or DVD+R/+RW or in
LPCM mode, from an external source.
As above, but for right (B) channel recording.
Select to use the 'live' audio track (recorded during the video
shoot) from a camcorder that supports two stereo audio
tracks.
Select to use the overdubbed audio track from a camcorder
that supports two stereo audio tracks.
Select one of the three settings to use a mix of the two stereo
audio tracks.
Output a Dolby Digital signal when a Dolby Digital source is
being played.
Convert Dolby Digital sources to Linear PCM output. Use if
your connected equipment doesn't have a Dolby Digital
decoder.
Output a DTS signal when a DTS source is being played.
Switch off the digital output when a DTS source is being
played. Use when your connected equipment doesn't have a
DTS decoder. In this case, use the analog audio outputs.
Convert 96 kHz digital audio sources to 48 kHz output. Use if
your connected equipment doesn't support 96 kHz sampling
rate.
Output 96 kHz digital audio when a 96 kHz source is being
played.
Output an MPEG audio signal when a source using MPEG
audio is being played.
Convert sources with MPEG audio to Linear PCM output. Use
if your connected equipment doesn't have an MPEG audio
decoder.
Switches on Audio DRC (Dynamic Range Control). Use when
listening to Dolby Digital material at low volume.
Switches off Audio DRC.
18
141
En