Recording Mode - Pioneer DVR-LX61D Operating Instructions Manual

Copying and backup
ENTER
5 Select 'Next' from the
command menu panel to proceed to the
title edit screen.
ENTER
6 Select a title to edit.
A menu appears of Copy List editing
commands:
• Erase – Erase individual titles from the
Copy List (see Erase on page 92).
• Move – Change the order of titles in the
Copy List (see Move on page 97).
• Preview – Check the content of a title in
the Copy List.
• Cancel – Exit the menu.
Repeat this step for as many titles you have
that need editing.
ENTER
7 Select 'Next' from the
command menu panel to proceed to the
copy options screen.
• Select Recording Mode if you want to
change the recording quality (see
Recording Mode below).
ENTER
8 Select 'Start Copy' to start
copying.

Recording Mode

ENTER
1 Select 'Recording Mode' from
the command menu panel.
Note
1 When copying to a DVD-R/-RW (Video mode) or DVD+R/+RW, the chapter markers in the copy may not be in
exactly the same position as the original.
2 When the copy mode is set to something other than High-Speed Copy for copying to a DVD-R/-RW (Video mode)
or DVD+R/+RW, the chapter markers of the original are not copied. Chapter markers are put into the copy at
regular intervals, according to the Auto Chapter setting (see also Auto Chapter (Video) and Auto Chapter
(DVD+R/+RW) on page 144).
3 When copying to a DVD+R/+RW, MN1 to MN3 and SEP modes are not available.
4 XP+ mode available only when copying to HDD.
5 Optimized mode only available when copying to DVD. Due to remaining space on the disc or the title that you
copy, this mode does not always exactly fill a disc.
ENTER
2 Select a recording mode for the
copy.
• High-Speed Copy
copied at the same recording quality as
the original.
• XP, SP, LP, EP, SLP, SEP, MN
List is copied at the specified recording
quality in real-time. (Note that if you copy
at a higher quality setting than the
original, the copy will not be better
quality than the original.)
If you select MN above, you can also
change the level setting (MN1 to
3
, LPCM or XP+
MN32
Recording Quality box that appears.
2,5
• Optimized – The recording quality is
automatically adjusted so that the Copy
List fits on to the space available on the
disc. Copying is carried out in real-time.
When you change the recording mode
setting, you can see how much disc space it
will require. If this is more than is available,
it shows up in red and you won't be able to
start copying. In this case, either change the
recording quality, or press RETURN/EXIT to
go back to the Copy List screen and erase
one or more titles from the Copy List.
Bilingual
1 Select the title containing the
audio you want to change.
ENTER
2 Select 'Bilingual' from the
command menu panel.
1
– The Copy List is
2
– The Copy
4
) from the
11
105
En