Connecting Other Av Sources; Connecting A Usb Device - Pioneer DVR-LX61D Operating Instructions Manual

Connections
any problems, set HDMI Control to On
for all connected units, and then display
the pictures stored on this unit on your
Flat Screen TV to improve the situations.
• We cannot guarantee this unit will work
with HDMI control-compatible
components other than those made by
Pioneer.

Connecting other AV sources

Connecting a VCR or analog
camcorder
HDD/DVD
HDD DVD
STANDBY/ON
COMMON INTERFACE
DV IN USB
AUDIO/VIDEO
OUTPUT
(Rear panel)
1
To audio/
Analog camcorder
video input
VCR
1 Connect a set of audio and video
inputs of your VCR or camcorder to a set
of outputs on this recorder.
This enables you to record from this recorder
to your VCR or camcorder.
• You can use standard video or S-Video
cables for the video connection.
• Alternatively, you can use the AV2
(INPUT 1/DECODER) SCART connector
for audio/video input and output with
just one SCART cable.
2 Connect a set of audio and video
outputs of your VCR or camcorder to a
set of inputs on this recorder.
This enables you to record tapes from your
VCR or camcorder.
• You can use standard video or S-Video
cables for the video connection.
OPEN/CLOSE
A.TV D.TV HDMI
REC
INPUT 2 S-VIDEO VIDEO L(MONO) R AUDIO
ONE TOUCH
STOP REC
COPY
INPUT
CH A.TV/D.TV
SELECT
AUDIO/VIDEO
INPUT
(Front panel)
2
From audio/
video output
• The front panel connections make
convenient connections for a camcorder
input.
• When connecting an external AV source
that only supports monaural sound, only
insert the left (white) audio jack to this
device. Doing so will allow the same
sound track to be recorded to both
channels. You must connect to the
INPUT 2 jack on the front panel.
Connecting a DV camcorder
You can connect a DV camcorder or DVD
recorder with DV output to the front panel
DV IN jack.
Important
• This jack is for connection to DV
equipment only. It is not compatible with
digital satellite receivers or D-VHS video
decks.
HDD/DVD
HDD DVD
STANDBY/ON
COMMON INTERFACE
DV IN USB
DV IN
From DV output
• Use a DV cable (not supplied) to
connect the DV jack of your DV
camcorder to the front panel DV IN jack
of this recorder.

Connecting a USB device

Using the USB ports on the front of the
recorder you can connect USB devices such
as HDD camcorders, digital cameras,
printers, keyboards and PCs. Please also see
the instructions that came with the device
you want to connect before using.
OPEN/CLOSE
A.TV D.TV HDMI
REC
INPUT 2 S-VIDEO VIDEO L(MONO) R AUDIO
ONE TOUCH
STOP REC
COPY
INPUT
CH A.TV/D.TV
SELECT
DV camcorder
02
23
En