Recording Time - Pioneer DVR-LX61D Operating Instructions Manual

Recording
Switching between TV and DVD
When the recorder is stopped or recording
you can choose whether to have the audio/
video from the built-in TV tuner (or external
input) play on your TV ('DVD mode'), or
watch the channel that the TV is currently set
to ('TV mode').
During playback or when a menu is being
displayed on-screen, the sound and video is
always routed to your TV and is unaffected by
the TV/DVD mode setting.
Note that the recorder must be connected to
your TV using a SCART cable to be able to
use this feature.
TV/DVD
Switch between TV mode and DVD
mode.
Setting the picture quality/

recording time

DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD
Before starting a recording, you will usually
want to set the picture quality/recording
time. There are six standard settings
available, which allow you to choose a
balance between picture quality and
recording time.
When Manual Recording is set to On (see
Manual Recording on page 143), a further
option will be available (MN1 to MN32,
LPCM, or XP+ (a super-high quality HDD
recording mode that features a transfer rate
of around 15 Mbps) depending on what you
set).
When recording to DVD, MN32 is the
highest recording quality available. If you
select XP+, the recording mode will
automatically revert to MN32.
Note
1 Audio is recorded in 16-bit Linear PCM format, video is recorded at XP quality. When recording a bilingual
broadcast, select which audio channel to record (see Bilingual Recording on page 141).
2 Applicable only to HDD recording. (If this setting is used when recording to DVD, MN32 is used.) When copied
to DVD, XP+ recordings are always copied in real time.
When recording to DVD+R/+RW, SLP is the
longest recording time available. If you
select SEP or MN1 to MN3, the recording
mode will automatically revert to SLP.
REC MODE
• Press repeatedly to select the
recording quality.
• XP – High quality setting, gives about
one hour of recording time on a DVD
disc.
• SP (Standard Play) – Default quality,
used for most applications, gives about
two hours of recording time on a DVD.
• LP (Long Play) – Lower video quality than
SP, but doubles the recording time on a
DVD to about four hours.
• EP (Extended Play) – Lower quality than
LP, but gives about six hours of
recording time on a DVD disc.
• SLP (Super Long Play) – Lower quality
than EP, but gives about eight hours of
recording time on a DVD disc.
• SEP (Super Extended Play) – Lowest
video quality but gives about ten hours of
recording time on a DVD disc.
• MN1 to MN32/LPCM
Linear PCM/XP+ (available only when
manual recording is on).
The setting is indicated in the front panel
display, and shown on-screen together with
the recording time for a blank recordable
disc. If a recordable disc is loaded, the
approximate remaining recording time for
that disc is also shown. (Note that if the On
Screen Display setting (see On Screen
Display on page 148) is Off then this
information is not displayed.)
1 2
/XP+ – Manual/
07
65
En