Pioneer DVR-LX61D Operating Instructions Manual page 36

Getting started
04
3
code.
The system uses your postal code to identify
which TV listings data is correct for the area
in which you live, so it is important that you
enter it correctly.
4 If you are using an external receiver
(such as a satellite receiver) with the
supplied G-LINK cable, complete this
step, otherwise jump to step 5 below.
• See Connecting to a cable box or satellite
receiver on page 17 for more on using the
supplied G-LINK cable.
• Select External Receiver 1, 2 or 3, then
press ENTER. (If you have just one
external receiver, use External
Receiver 1. You can add further
receivers in 2 and 3 if you need to.)
After pressing ENTER:
36
En
ENTER
Enter your postal
• Select your reception method
(Terrestrial, Cable or Satellite).
• Select your provider (if applicable).
• Select the brand of your external
receiver.
• Identify which input your external
receiver is connected to.
After completing these steps the recorder
will try and communicate with your external
receiver and change the channel via the
G-LINK cable. If the channel was
successfully changed, select Yes to confirm.
If the channel did not change, select No. The
GUIDE Plus+ system will try other codes
assigned to your external receiver. If none of
the codes changes the channel
successfully, tune your external receiver to
the Host Channel for your country (refer to
step 5 below) and leave it on overnight. The
recorder needs to be in standby; it will wake
up automatically and download new codes
from the Host Channel. The next day, try this
setup process again:
• Press GUIDE to display the GUIDE
Plus+ screen.
• Press  to highlight the Menu bar, then
use  to reach the Setup area and
select Setup.
• Continue setting up from the start of this
step again.
If your external receiver still doesn't respond
to the G-LINK controller, please call
customer support and report the brand and
model of your external receiver.
See also GUIDE Plus+® FAQ and
troubleshooting on page 50.
5 Identify the Host Channel for your
country.
The TV listings information available in the
GUIDE Plus+ system is distributed
throughout Europe by selected broadcasters
called Host Channels. It is important that the
host (analog) channel for your country is
correctly identified in order to receive listings
information (EPG download).
Follow A, B or C below depending on your
setup: