Pioneer DVR-LX61D Operating Instructions Manual page 138

The Initial Setup menu
18
Setting
Signal Check
Aerial Power
If the setting keeps reverting to Off when you try to set to On or Auto, the aerial may not be connected properly, or
it may be shorted. In either case, check the connection and try making the setting again.
D.TV Language
Analog Tuner
Auto Channel
Setting
138
En
Options Explanation
Next Screen Use this screen to check the signal level and quality of digital
channels. Use the / buttons to change the RF channel;
select Add New Channels then press ENTER to scan for
new channels; press HOME MENU to exit.
On Power is supplied to the connected aerial (antenna) when
this recorder is on or in standby.
Power is supplied to the connected aerial (antenna) only
Auto
when this recorder is on.
This recorder does not supply power to the connected aerial
Off •
(antenna).
From this screen you can set your Primary and Secondary
Next Screen
Audio preference for multilingual digital broadcasts, your
Primary and Secondary Subtitle preference for programmes
that are broadcast with subtitles, and your Teletext language
preference. Use the / buttons to highlight a field then
use the / buttons to change it.
Select your country and then wait for the recorder to auto
Auto Scan
tune into channels in your area. After auto scan has finished,
the channel mapping screen appears showing which
channels have been assigned to which programme
numbers. You can skip unwanted channels using the Manual
CH Setting option (see page 139).
Press HOME MENU to exit the channel mapping screen.
If your TV supports this feature you can download all the
Download
channels that your TV is tuned to via the SCART input. Select
from TV
your country and then wait for the download to complete.
After the download is complete, the channel mapping screen
appears, as above. See also the operating instructions that
came with your TV for more information.