Easy Connections; Output - Pioneer DVR-LX61D Operating Instructions Manual

Connections
02

Easy connections

The setup described below is a basic setup
that allows you to watch and record TV
programmes, and play discs. Other types of
connections are explained starting on the
following page.
Important
• These connections use SCART cables
(not supplied). If your TV (or VCR) does
not have a SCART connection, and you
want to use the supplied audio/video
cable, see Using the supplied audio/video
cable below.
• The AV1 (RGB)-TV AV connector can
output ordinary (composite), S-Video or
RGB video, plus stereo analog audio. The
AV2 (INPUT 1/DECODER) connector
accepts ordinary, S-Video and RGB video
input, as well as stereo analog audio.
See AV1 Out and AV2/L1 In on page 140
for how to setup these options.
• Before making or changing any rear
panel connections, make sure that all
components are switched off and
unplugged from the wall outlet.
To antenna
From antenna

output

VCR
To recorder's
antenna input
AV2 (INPUT 1/
DECODER)
AUDIO VIDEO
R L
ANTENNA
IN
S-VIDEO
INPUT 3
AV 2 (INPUT 1/DECODER)
OUT
P
Y B P R
AV 1 (RGB) – TV
COMPONENT VIDEO OUT OUTPUT
AV1 (RGB) - TV
TV
16
En
1
Antenna/cable TV
wall outlet
input
From SCART AV
connector
3
COAXIAL
LAN(10/100)
DIGITAL OUT
HDMI OUT
5 V 30 mA
G-LINK
IN IN OUT
CONTROL
ANTENNA(DIGITAL)
2
To SCART AV
connector
1 Connect your TV antenna to the
recorder and TV.
See Connecting a TV antenna on page 15 for
details.
• If you want to incorporate a VCR in your
setup, connect it before the recorder (i.e.,
between the antenna wall outlet and the
antenna input on the recorder).
2 Use a SCART cable (not supplied) to
connect the AV1 (RGB)-TV AV connector
on this recorder to the SCART AV
connector on your TV.
3 Use another SCART cable to connect
the AV2 (INPUT 1/DECODER) AV
connector to a SCART AV connector on
your VCR.
Tip
• This recorder has a 'through' function
which allows you to record a TV
programme from the built-in TV tuner in
this recorder while watching a video
playing on your VCR (To use this feature
when the recorder is in standby, Power
Save must be set to Off — see Power
Save on page 136).
Using other types of audio/
video output
If you can't use the SCART AV connector to
connect your TV to this recorder, there are
standard audio/video output jacks, as well as
an S-Video and component video output.
Using the supplied audio/video
cable
AC IN
To audio input
To video
input
AUDIO VIDEO
OUTPUT OUTPUT
2 1
AUDIO VIDEO
R L
ANTENNA
IN
S-VIDEO
INPUT 3
OUT
Y P B P
R
COMPONENT VIDEO OUT OUTPUT
TV
COAXIAL
LAN(10/100)
AV 2 (INPUT 1/DECODER)
HDMI OUT DIGITAL OUT
5 V 30 mA
G-LINK IN IN OUT
CONTROL
ANTENNA(DIGITAL)
AV 1 (RGB) – TV
AC IN